Customization: | Available |
---|---|
Application: | printing |
Shape: | Flat |
Still deciding? Get samples of US$ 3/Square Meter
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Haomei company production and operation Positive HDP-I PS Plate, Negative PS Plate (HDN),Thermal CTP (HLR), Haomei of PS plate with composite sand structure, good hydrophilicity,Rough guide gas, photosensitive fast, Press run, points clear, etc
ype | Details | Positive PS Plate (CXK-M28) |
Parameter |
Spectra Sensitivity | 320-450 nm |
Exposure Time | 3000W, h=1m, 50s. | |
Resolution | 2-98% 200 Lpi/10μ FM | |
Thickness | 0.15-0.40 mm | |
Storage | Store in a dry, bleak place. (Temperature range 5-30ºC , RH around 40%-60%.) |
|
Warranty Period | 18 months | |
Developing |
Developer Ratio | Manuel : Water = 1:8 ; Automatic : Water = 1:6 |
Developer Temperature | 24-25 ºC | |
Process Speed | 20-25 seconds | |
Run-length | 60,000 - 1,000,000 (unbaked) Varies with its printing conditions and imaging content. |
|
Safelight | Yellow light |
This type of PS plate has such characteristics: high sensitivity, high resolution, wide developing tolerance and long-run length. Photosensitive coatings are synthesized from imported sensitizers and resins. Using the gas-conduction particle technology that greatly reduces the vacuum time. Multi-layer composite sand, good hydrophilic, accelerate ink balance, reduce the layout of water. And the high-strength anodizing enhances the resistance to printing.
.
Aluminum thickness |
0.15-0.3mm |
Aluminum alloy state |
1050H18 |
Surface roughness |
0.5-0.65um |
The mass per unit area of oxide layer |
2.0-3.5g/m2 |
The mass per unit area of sensitive layer |
2.0-2.5g/m2 |
Exposure quantity |
140-200mj/m2 |
Dot reproduction ability |
2-98% |
Definition |
8-10um |
Dernsity of Piaae surstotfi background color |
<0.01 |
Anti-printing rate |
50,000-100,000 printings |
Storage period |
l8months,shady,Against moisture,against heat |
Deposit conditions |
Temperature30°C,Relative humidity65°C,Stack height 1.5m |
Haomei Aluminum Offset Printing Positive Traditional PS Platesperformance: stability, exposure time, plate-making speed; Network reduction, error less than 1%; High press run, can press 500000 impressions after baking.; operatg in the daylight room, easy to use; good ink-water balance, printing cost is low
We carry a complete line of Aluminum Offset Printing Positive Traditional PS Plates at unbeatable prices. Whatever type of CTP plate you are looking for we can help. If have any questions about the compatibility of our CTP plates with your platesetter then give us a call, we'll be glad to help. Every CTP plate is 100% Guaranteed.