6061-T6 ALUMINUM TREAD PLATE Five Bar Treadplate aluminium floor plate
1. Alloy: 1050, 1060, 1070, 1100, 3003, 3004, 3105, 5052, 5083, 6061
2. Temper: F, HO, H12, H14, H16, H18, H22, H24, H26, H32, H111, H112, T651
3. Pattern: Finger, 2 bars, 3 bars, 5 bars, and diamond bars
4. Thickness: 0.8 - 6.0mm
5. Width: 500 ~ 2200mm
6. Length: Under 10000mm or in coil
7. Coil ID: 300, 400, 500, etc
8. Origin: China
9. Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight;
10. Lead Time: Within 30 days after receiving deposit
The 6061 T6 aluminum tread plate has the highest corrosion resistance of all the aluminums that have been heat treated. It is an alloy that has been formed with silicon and magnesium. It has a lower strength than other comparable aluminums, but is still widely used. This is partly due to its corrosion resistance and partly due to its excellent mechanical properties. There are a variety of ways you can form 6061 aluminums, such as through machining and welding. The machinability rating of this alloy is 90 percent. It also has great joining capabilities. If needed, this product can be anodized or have other coatings applied.
The applications 6061 aluminum alloys are frequently used for include base plates, truck components, marine fittings, marine components, marine hardware, electrical connectors, electrical fittings and camera lens mounts. This is only a few of the wide array of applications this alloy is used for. It also has the capability to be used for heavy duty structures that need corrosion resistance and good weight-to-strength ratio.
Hot treating and cold working can also be used for 6061 alloys. When in the annealed state, cold working can be easily performed, creating an end product that is cut, stamped, drilled, deep drawn, bent or tapped. These can all be achieved using standard cold working methods.
When heat treating this alloy, thorough heating should be done at 990 degrees F, and then be water quenched. For precipitation hardening, the metal should be placed in 320 degrees F for 18 hours, air cooled, then placed in 350 degree F for eight hours, and then air cooled again.
The 6061 T6 aluminum tread plate is available in sizes between .125 and .375 inch thick, 48 inches wide and up to 192 inches long.
| Thickness |
Min: 0.125
Max: 0.375 |
| Length |
Max: 192 |
| Width |
Min: 48
Max: 48 |
| Other (Wall, Etc…) |
Min: n/a
Max: n/a |
| Tolerances |
Thickness: +/-.012 TO +/-.165 DEPENDING ON THICKNESS AND WIDTH
Width: +/-.060 TO +.375 DEPENDING ON THE THICKNESS AND WIDTH
Length: +/.060 TO +.5 DEPENDING ON THICKNESS AND LENGTH |
Packaging & Delivery
Packing: export standard, covering with brown paper and plastic film then packed with wooden case/palletPacking: export standard, covering with brown paper and plastic film then packed with wooden case/pallet such 2-3 tonnes in 1 wooden pallet. Such 18-22 tonnes in 1x20' container.
5 bar aluminum tread plate Packaging
As you can see, these different 5 bar aluminum tread plate' size including customized shape and sizecan create a range of different Anti skid pattern plate in different time frames. Some are for very specific purposes while others cover a wider range of Anti skid pattern plate needs. If you still have questions about the different 5 bar aluminum tread plate' size or for more information, please contact us.
Audited Supplier 
){kind=link}
){kind=link}