5052 marine grade aluminum alloy sheet
5052 marine grade aluminum plate sheet contains nominally contains 2.5% magnesium & 0.25% chromium. It has good workability, medium static strength, high fatigue strength, good weldability, and very good corrosion resistance, especially in marine atmospheres. It also has the low density and excellent thermal conductivity common to all aluminium alloys
Alloy: 5052
Temper: H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. O etc.
Thickness: 0.2mm -- 400mm
Width: Under 2800mm
Length: Under 10000mm
Packing: Export standard, covering with brown paper and plastic film then packed with steel band & wooden case/pallet
Origin: China
Lead Time: Within 25 days
Productivity: 4000MT/Month
Payment: T/T, irrevocable L/C at sight
Remarks: Specific requirement of alloy, temper or specification can be discussed at per your request.
| Aluminium Plate / Slab 5052 |
| Typical Chemistry (% Maximum unless shown as a range) |
| Cu |
Si + Fe |
Mn |
Mg |
Zn |
Cr |
Al |
| 0.10 |
0.45 |
0.10 |
2.2 / 2.8 |
0.10 |
0.15 / 0.35 |
Balance |
| Characteristics |
| 5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades. |
| Typical Applications |
| 5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing. |
| Mechanical Properties |
| |
Tensile Strength |
Yield Strength |
Elongation |
Brinell Hardness |
| |
ksi |
MPa |
ksi |
MPa |
% in 2"
(50mm) |
|
| 5052-0 |
28.0 |
196 |
13.0 |
91 |
25 |
47 |
| 5052-H32 |
33.0 |
231 |
28.0 |
196 |
12 |
60 |
| 5052-H34 |
38.0 |
266 |
31.0 |
217 |
10 |
68 |
| Aluminium Plate / Slab 5083 |
| Typical Chemistry (% Maximum unless shown as a range) |
| Cu |
Si |
Fe |
Mn |
Mg |
Zn |
Cr |
Ti |
Al |
| 0.10 |
0.40 |
0.40 |
0.3 / 1.0 |
4.0 / 4.9 |
0.25 |
0.05 / 0.25 |
0.15 |
Balance |
| Characteristics |
| 5083 is the highest strength non-heat-treatable alloy in commercial use. It has good formability and weldability and retains excellent tensile strength in the weld zone by virtue of its as-rolled properties. It is used most often in structures requiring high weld efficiency and maximum weld strength. 5083 also has excellent resistance to corrosion. |
| Typical Applications |
| 5083 is commonly used in highly stressed welded assemblies, dump truck boxes, storage tanks, and cryogenic vessels. |
| Mechanical Properties |
| |
Tensile Strength |
Yield Strength |
Elongation |
Brinell Hardness |
| |
ksi |
MPa |
ksi |
MPa |
% in 2"
(50mm) |
|
| 5083-0 |
42 |
294 |
21 |
147 |
22 |
- |
| 5083-H321 |
46 |
322 |
33 |
231 |
16 |
- |
| Aluminium Plate / Slab 6061 |
| Typical Chemistry (% Maximum unless shown as a range) |
| Cu |
Si |
Fe |
Mn |
Mg |
Zn |
Cr |
Ti |
Al |
| 0.15 / 0.40 |
0.4 / 0.8 |
0.70 |
0.15 |
0.80 / 1.2 |
0.25 |
0.04 / 0.35 |
0.15 |
Balance |
| Characteristics |
| 6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration. |
| Typical Applications |
| 6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers. |
| Mechanical Properties |
| |
Tensile Strength |
Yield Strength |
Elongation |
Brinell Hardness |
| |
ksi |
MPa |
ksi |
MPa |
% in 2"
(50mm) |
|
| 6061-0 |
18.0 |
126 |
8.0 |
56 |
25 |
30 |
| 6061-T4 |
34.0 |
238 |
22.0 |
154 |
21 |
65 |
| 6061-T6 (T651) |
44.0 |
308 |
41.0 |
287 |
17 |
95 |
Audited Supplier 
){kind=link}