Aluminium foil 8011 for tagger lids

• Usage: Food Use, Seal & Closure, Label & Tag
• Type: Roll
• Temper: Soft
• Treatment: Coated
• Thickness: Single Zero Foil
• Surface State: Double light Aluminum Foil
• Model NO.: 8011 O
• Rolling Characteristics: Rolling
• Material: metal
• Name: Aluminum Foil 8011 1050 for lids peel off
• Metal: Aluminum
• Surface: protective lacquer coating
• Width: Under 1250mm
• Transport Package: Export Standard, Covering with Brown Paper
• Specification: O, H12. H14. H16. H18. H22. H24. H26. H28.
• Trademark: HM
• Origin: China Henan
• HS Code: 76071190
• Production Capacity: 4000mt/Month

Product Description

Clear lacquer Aluminum foil for aluminium easy peel off end lid top, which is Ideal materials for dry and non-processed foods, the main applications are the following :Milk Powder and Infant Formula, Instant Coffee and Tea, Snacks and Nuts, Non-food items.
 
 Aluminium easy peel off end lid top for food cans are typically coated on aluminum sheets rather than coils. Clear lacquer aluminum foil sheet for easy peel off foil end lid top coatings are applied by direct-roll coaters similar to those used in sheet coating operations for 3-piece can bodies, and some facilities use the same coating lines to coat can bodies and ends. Because both the interior and exterior surfaces are usually coated, each sheet is subjected to two separate application and drying steps. If UV-cured exterior coatings are used, these coatings are applied first. The UV coating is set by passing the sheets under a bank of UV drying lamps. Clear lacquer Aluminum foils sheets are then collected and turned over by wickets in preparation for the interior coating application, which is applied by a direct-roll coater. The sheets then pass through a drying oven to cure the interior coatings and complete the cure of the exterior UV-cured coating. Can ends are then formed in processes similar to those used to produce aluminum beverage can ends. The end seal compound application step is also similar to that used in aluminum beverage can manufacturing.
 

Specifications

• We supply pure aluminium foil, either with a clear, protective lacquer coating or with a heat-seal lacquer coating, in thicknesses from 0.060 to 0.120 mm.
• This aluminium foil lacquered with a protective coating on both sides for "Penny Lever Closures" or coated with a heat-sealing lacquer on one side for "Peel-off" applications.
• Lids of this "Peel-off" quality can be opened very easily by means of the pre-formed easy open ring or tear-off tab. The lid detaches completely from the can.

Alloy	Temper	Specification (mm)
		Thickness	Width	Tolerance(mm)
8011, 1050	HO	0.06~0.10	100~560	Thickness: ±0.005, Width: ±0.5
Remark: special specifications can be produced accordingly to your requirement.

Chemical Composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Others
										each	Total
8011	0.5~0.9	0.6~1.0	0.1	0.2	0.05	0.05	-	0.1	0.08	0.05	0.15
1050	0.25	0.4	0.05	0.05	0.05	-	-	0.05	0.03	0.03	-

TEST REPORT

TEST ITEM		TECHNICAL REQUIREMENTS		RESULT		CHISQUARECRITERION
SIZ(MM)	THICKNESS BIAS	±0.005		≤0.005		ELIGIBLE
	WIDTH BIAS	±0.5		±0.2		ELIGIBLE
APPARENCE	SURFACE	CLEANSING&EQUITHICKNESS				ELIGIBLE
	PINHOLE DEGREES	NODENSE,CONTINUOUS,PERIODICPINHOLESD>0.3MM/ISNOT ALLOWED,D=0.1-0.3MMNO MORE THAN ONE		NO		ELIGIBLE
COATING	THE COATING SHOULD BE EVENLY	EVENLY		SATISFACTORY		ELIGIBLE
PHYSICAL  PROPERTIES	PROTECTIVE COATING CUHESIVE	NO SPALLING		NO		ELIGIBLE
	THEHEATRE SISTANT OF  COATING	200 ºC WITHOUT SPALLING		NO SPALLING		ELIGIBLE
	COATINGWEIGHT(SINGLE)g/	1.0±0.2		1.0		ELIGIBLE
	COATING BIAS(%)	±10		-2.0~+2.2		ELIGIBLE
	ROLL PERFORMANCE	NO ADHESION DURING ROLL		NOADHESION		ELIGIBLE
	RESISTANCE PROPERTY	0.5g(m^2·24h)		SATISFACTORY		ELIGIBLE
MECHANICAL PROPERTY	TENSILE STRENGTH(Mpa)	60-120		75~85		ELIGIBLE
	ELONGATION/%A100mm	≥4		8		ELIGIBLE
	CUP BULGE	≥6		6.5~7.2		ELIGIBLE
CHEMICAL PROPERTIES	FLUORESCENTSUBSTANCE	CAN NOT BE PIECES		SATISFACTORY		ELIGIBLE
	VOLATILE SUBSTANCE≤4mg	3mg		1		ELIGIBLE
	DISSOLVED MATTER	EASYOXIDE(ML)0.02ML/LPOTASSIUMPERMANGANATE LIQUID		≤1.5ml	0.8ml	ELIGIBLE
		HEAVY METALS(mg/L)		≤0.25 mg/L		ELIGIBLE
MICROBALCONTENT	BACTERIAL		≤1000PC/100C	SATISFACTORY		ELIGIBLE
	MYCETE AND SACCHAROMYCETES		≤100PC/100C	SATISFACTORY		ELIGIBLE
	COLIBACILLUS		CAN NOT BE EXIST	NO		ELIGIBLE
UNDUE TOXICITY			NO	NO		ELIGIBLE
CONCLUSION			BLIGIBLE

 

Application areas

• Packaging of powdered foodstuffs (milk, coffee, beverages).
• Dry products (tobacco, mixed spices).