• Wine Cap used Aluminium Sheet
  • Wine Cap used Aluminium Sheet
  • Wine Cap used Aluminium Sheet
  • Wine Cap used Aluminium Sheet
  • Wine Cap used Aluminium Sheet
  • Wine Cap used Aluminium Sheet

Wine Cap used Aluminium Sheet

Type: Sheet
Temper: Half Hard
Treatment: Printed
Thickness: Thick Foil
Surface State: Double light Aluminum Foil
Rolling Characteristics: Rolling
Samples:
US$ 0/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Diamond Member Since 2008

Suppliers with verified business licenses

Basic Info.

Model NO.
8011 3105
Material
aluminum
Transport Package
Wooden Case, Wooden Pallet
Specification
sheet, coil, strip
Trademark
HM
Origin
China
HS Code
76071190
Production Capacity
4000tons/Year

Product Description

Wine Cap Aluminium Sheet
1.         Alloy: 8011, 3105
2.         Temper: H14, H24, H16, H26
3.         Pattern: rolled, degreased, pre-lubricated, pre-treated, lacquered
4.         Thickness: 0.16 0.23mm
5.         Width: 500 ~ 1200mm
6.         Length: 500 ~ 1200mm
7.         Coil ID: 75, 150, 300, 500, etc
8.         Origin: China
9.         Performance of printed aluminum sheet:
Wine Cap used Aluminium SheetWine Cap used Aluminium SheetWine Cap used Aluminium SheetWine Cap used Aluminium Sheet

1) In complete sizes and sorts, with clear and beautiful pattern.
2) If applying fluorescence, change to different temperatures and composite anti-forging printing technique, the effect will be better.
3) High temperature resistant without any distortion and color change;
4) The paint won't peel off during production;
5) Tensile Strength: 145;
6) Yield Strength: 136-137;
7) Elongation: 2.0;
8) Earing Rate: <2%;
9) It's the best material for medicine/wine caps;
10) Small order is acceptable.
10.     Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight;
Lead Time: Within 30 days after receiving deposit
Wine Cap used Aluminium Sheet
Wine Cap used Aluminium Sheet
 
Chemical Composition limits(WT.%)
Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Al
8011 0.5~0.9 0.6~1.0 0.1 0.2 0.05 0.05 - 0.1 0.08 Remains
3105 0.6 0.7 0.3 0.3~0.8 0.2~0.8 0.2 - 0.4 0.1 Remains
Mechanical Property for Continuous Casting
Alloy Temper Thickness (mm) U.T.S (Mpa) Elongation (%)
8011 H14 0.16~0.23 185~205 >=2
Mechanical Property for Direct Casting
Alloy Temper Thickness (mm) U.T.S (Mpa) Elongation (%)
8011 H14 0.16~0.23 125~155 >=2

Send your message to this supplier

*From:
*To:
avatar Mr. Ben Ma
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now