5083 Aluminium Alloy Plate for Water Tank

• Customization: Available
• Application: Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations
• Certification: EN, ASTMB, ASTM, JIS, GB/T
• Model NO.: 5083
• Technique: Hot rolled
• Grade: 5000 Series
• Temper: O - H112
• Surface Treatment: Mill Finish
• Alloy: Alloy
• Surface: Mill Finish
• Type: Aluminium Plate
• Shape: Flat
• Transport Package: Export Standard, Wooden Pallet
• Specification: China Standard
• Trademark: HM
• Origin: China
• HS Code: 7606129000
• Production Capacity: 4000mt/Month

Product Description

5083 Aluminium Alloy Plate for Water Tank

Alloy: 1050, 1060, 1100, 3003, 5052 5083 6061 5005 6063 6082 7075 etc.
Temper: H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. O etc.
Thickness: 0.2mm -- 400mm
Width: Under 2800mm
Length: Under 10000mm
Packing: Export standard, covering with brown paper and plastic film then packed with steel band & wooden case/pallet
Origin: China
Lead Time: Within 25 days
Productivity: 4000MT/Month
Payment: T/T, irrevocable L/C at sight
Remarks: Specific requirement of alloy, temper or specification can be discussed at per your request.

Aluminium Plate / Slab 5052

Typical Chemistry (% Maximum unless shown as a range)

 
 
 

Cu	Si + Fe	Mn	Mg	Zn	Cr	Al
0.10	0.45	0.10	2.2 / 2.8	0.10	0.15 / 0.35	Balance

 
 
 

Characteristics

5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades.

Typical Applications

5052 is often used in high strength sheet metal work, marine components, appliances, fuel and oil tubing.

Mechanical Properties

 
 
 

	Tensile Strength		Yield Strength		Elongation	Brinell Hardness
	ksi	MPa	ksi	MPa	% in 2" (50mm)
5052-0	28.0	196	13.0	91	25	47
5052-H32	33.0	231	28.0	196	12	60
5052-H34	38.0	266	31.0	217	10	68

 
 
 
 

Aluminium Plate / Slab 5083

Typical Chemistry (% Maximum unless shown as a range)

 
 
 

Cu	Si	Fe	Mn	Mg	Zn	Cr	Ti	Al
0.10	0.40	0.40	0.3 / 1.0	4.0 / 4.9	0.25	0.05 / 0.25	0.15	Balance

 
 
 

Characteristics

5083 is the highest strength non-heat-treatable alloy in commercial use. It has good formability and weldability and retains excellent tensile strength in the weld zone by virtue of its as-rolled properties. It is used most often in structures requiring high weld efficiency and maximum weld strength. 5083 also has excellent resistance to corrosion.

Typical Applications

5083 is commonly used in highly stressed welded assemblies, dump truck boxes, storage tanks, and cryogenic vessels.

Mechanical Properties

 
 
 

	Tensile Strength		Yield Strength		Elongation	Brinell Hardness
	ksi	MPa	ksi	MPa	% in 2" (50mm)
5083-0	42	294	21	147	22	-
5083-H321	46	322	33	231	16	-

 
 
 
 

Aluminium Plate / Slab 6061

Typical Chemistry (% Maximum unless shown as a range)

 
 
 

Cu	Si	Fe	Mn	Mg	Zn	Cr	Ti	Al
0.15 / 0.40	0.4 / 0.8	0.70	0.15	0.80 / 1.2	0.25	0.04 / 0.35	0.15	Balance

 
 
 

Characteristics

6061 is a heat-treatable grade widely used in light to medium strength structural applications. The alloy has good corrosion resistance and weldability and possesses good formability in the 0 to T4 tempers. 6061 does lose appreciable strength when welded and it is replaced by the 5000 series alloys where afterweld strength is a prime consideration.

Typical Applications

6061 is used in structural areas where both strength and corrosion resistance is required, truck bodies and frames, and towers.

Mechanical Properties

 
 
 

	Tensile Strength		Yield Strength		Elongation	Brinell Hardness
	ksi	MPa	ksi	MPa	% in 2" (50mm)
6061-0	18.0	126	8.0	56	25	30
6061-T4	34.0	238	22.0	154	21	65
6061-T6 (T651)	44.0	308	41.0	287	17	95

We can also make smaller cutting sizes according to customers' requirement.