Customization: | Available |
---|---|
Application: | Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations |
Certification: | ASTM, EN |
Still deciding? Get samples of US$ 2/kg
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Wrought aluminium alloy composition limits (% weight) | ||||||||||||||||
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti | Bi | Ga | Pb | Zr | Limits ? ? | Al | |
Each | Total | |||||||||||||||
1050 [6] | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | 0.05 | 0.03 | 99.5 min | ||||||||
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.03 | 0.05 | 0.05 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 0.03 | 99.6 min | |
1100 | 0.95 Si+Fe | 0.05- 0.20 | 0.05 | 0.1 | 0.05 | 0.15 | 99.0 min | |||||||||
1199 [6] | 0.006 | 0.006 | 0.006 | 0.002 | 0.006 | 0.006 | 0.005 | 0.002 | 0.005 | 0.002 | 99.99 min | |||||
2014 | 0.50- 1.2 | 0.7 | 3.9- 5.0 | 0.40- 1.2 | 0.20- 0.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | remainder | |||||
2024 | 0.5 | 0.5 | 3.8- 4.9 | 0.30- 0.9 | 1.2- 1.8 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | remainder | |||||
2219 | 0.2 | 0.3 | 5.8- 6.8 | 0.20- 0.40 | 0.02 | 0.1 | 0.05- 0.15 | 0.02- 0.10 | 0.10- 0.25 | 0.05 | 0.15 | remainder | ||||
3003 | 0.6 | 0.7 | 0.05- 0.20 | 1.0- 1.5 | 0.1 | 0.05 | 0.15 | remainder | ||||||||
3004 | 0.3 | 0.7 | 0.25 | 1.0- 1.5 | 0.8- 1.3 | 0.25 | 0.05 | 0.15 | remainder | |||||||
3102 | 0.4 | 0.7 | 0.1 | 0.05- 0.40 | 0.3 | 0.1 | 0.05 | 0.15 | remainder | |||||||
4043 | 4.5- 6.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.1 | 0.2 | 0.05 | 0.15 | remainder | ||||||
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2- 2.8 | 0.15- 0.35 | 0.1 | 0.05 | 0.15 | remainder | ||||||
5083 | 0.4 | 0.4 | 0.1 | 0.40- 1.0 | 4.0- 4.9 | 0.05- 0.25 | 0.25 | 0.15 | 0.05 | 0.15 | remainder | |||||
5086 | 0.4 | 0.5 | 0.1 | 0.20- 0.7 | 3.5- 4.5 | 0.05- 0.25 | 0.25 | 0.15 | 0.05 | 0.15 | remainder | |||||
5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.10- 3.90 | 0.15- 0.35 | 0.2 | 0.2 | 0.05 | 0.15 | remainder | |||||
5356 | 0.25 | 0.4 | 0.1 | 0.1 | 4.50- 5.50 | 0.05- 0.20 | 0.1 | 0.06- 0.20 | 0.05 | 0.15 | remainder | |||||
5454 | 0.25 | 0.4 | 0.1 | 0.50- 1.0 | 2.4- 3.0 | 0.05- 0.20 | 0.25 | 0.2 | 0.05 | 0.15 | remainder | |||||
5456 | 0.25 | 0.4 | 0.1 | 0.50- 1.0 | 4.7- 5.5 | 0.05- 0.20 | 0.25 | 0.2 | 0.05 | 0.15 | remainder | |||||
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6- 3.6 | 0.3 | 0.2 | 0.15 | 0.05 | 0.15 | remainder | |||||
6005 | 0.6- 0.9 | 0.35 | 0.1 | 0.1 | 0.40- 0.6 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | remainder | |||||
6005A ? | 0.50- 0.9 | 0.35 | 0.3 | 0.5 | 0.40- 0.7 | 0.3 | 0.2 | 0.1 | 0.05 | 0.15 | remainder | |||||
6060 | 0.30- 0.6 | 0.10- 0.30 | 0.1 | 0.1 | 0.35- 0.6 | 0.05 | 0.15 | 0.1 | 0.05 | 0.15 | remainder | |||||
6061 | 0.40- 0.8 | 0.7 | 0.15- 0.40 | 0.15 | 0.8- 1.2 | 0.04- 0.35 | 0.25 | 0.15 | 0.05 | 0.15 | remainder | |||||
6063 | 0.20- 0.6 | 0.35 | 0.1 | 0.1 | 0.45- 0.9 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | remainder | |||||
6066 | 0.9- 1.8 | 0.5 | 0.7- 1.2 | 0.6- 1.1 | 0.8- 1.4 | 0.4 | 0.25 | 0.2 | 0.05 | 0.15 | remainder | |||||
6070 | 1.0- 1.7 | 0.5 | 0.15- 0.40 | 0.40- 1.0 | 0.50- 1.2 | 0.1 | 0.25 | 0.15 | 0.05 | 0.15 | remainder | |||||
6082 | 0.7- 1.3 | 0.5 | 0.1 | 0.40- 1.0 | 0.60- 1.2 | 0.25 | 0.2 | 0.1 | 0.05 | 0.15 | remainder | |||||
6105 | 0.6- 1.0 | 0.35 | 0.1 | 0.1 | 0.45- 0.8 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | remainder | |||||
6162 | 0.40- 0.8 | 0.5 | 0.2 | 0.1 | 0.7- 1.1 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | remainder | |||||
6262 | 0.40- 0.8 | 0.7 | 0.15- 0.40 | 0.15 | 0.8- 1.2 | 0.04- 0.14 | 0.25 | 0.15 | 0.40- 0.7 | 0.40- 0.7 | 0.05 | 0.15 | remainder | |||
6351 | 0.7- 1.3 | 0.5 | 0.1 | 0.40- 0.8 | 0.40- 0.8 | 0.2 | 0.2 | 0.05 | 0.15 | remainder | ||||||
6463 | 0.20- 0.6 | 0.15 | 0.2 | 0.05 | 0.45- 0.9 | 0.05 | 0.05 | 0.15 | remainder | |||||||
7005 | 0.35 | 0.4 | 0.1 | 0.20- 0.70 | 1.0- 1.8 | 0.06- 0.20 | 4.0- 5.0 | 0.01- 0.06 | 0.08- 0.20 | 0.05 | 0.15 | remainder | ||||
7022 | 0.5 | 0.5 | 0.50-1.00 | 0.10- 0.40 | 2.60- 3.70 | 0.10- 0.30 | 4.30- 5.20 | 0.2 | 0.05 | 0.15 | remainder | |||||
7072 | 0.7 Si+Fe | 0.1 | 0.1 | 0.1 | 0.8- 1.3 | 0.05 | 0.15 | remainder | ||||||||
7075 | 0.4 | 0.5 | 1.2- 2.0 | 0.3 | 2.1- 2.9 | 0.18- 0.28 | 5.1- 6.1 | 0.2 | 0.05 | 0.15 | remainder | |||||
7079 | 0.3 | 0.4 | 0.40- 0.80 | 0.10- 0.30 | 2.9- 3.7 | 0.10- 0.25 | 3.8- 4.8 | 0.1 | 0.05 | 0.15 | remainder | |||||
7116 | 0.15 | 0.3 | 0.50- 1.1 | 0.05 | 0.8- 1.4 | 4.2- 5.2 | 0.05 | 0.05 | 0.03 | 0.05 | 0.15 | remainder | ||||
7129 | 0.15 | 0.3 | 0.50- 0.9 | 0.1 | 1.3- 2.0 | 0.1 | 4.2- 5.2 | 0.05 | 0.05 | 0.03 | 0.05 | 0.15 | remainder | |||
7178 | 0.4 | 0.5 | 1.6- 2.4 | 0.3 | 2.4- 3.1 | 0.18- 0.28 | 6.3- 7.3 | 0.2 | 0.05 | 0.15 | remainder | |||||
? Manganese plus chromium must be between 0.12- 0.50%. | ||||||||||||||||
? ? This column lists the limits that apply to all elements, whether a table column exists for them or not, for which no other limits are specified. |