PVDF color coated aluminum coil for Aluminium Composite Panel
PVDF coated aluminum coil is a high-quality alloy and smooth color coated aluminum coil. After production processes such as cleaning, chromizing, rolling, baking, etc., paint coatings of various colors are attached to the surface of the aluminum coil.
1.Substrates: Aluminium (AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc), etc.
2.Thickness: 0.08-4.0mm
3.Width: <1800mm
4.Coils core diameter: 150mm ,405mm, 505mm, 508mm, 510mm
5.Coating thickness: PVDF >=25micron POLYESTER>=18micron
6.Color standard: E < 2 or it is not obvious by eyeballing
7.Pencil hardness: > 2HB
8.Coating adhesive: not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993)
9.Bend stength: >100 times
10.Boiling point: no any distortion and color change (in the 99 more or less 1 degree water, then cooling 2 hours)
11.Corrosive: surface deep in the 5% muriatic acid and 5% NaCL, interior deep in the 2% muriatic acid and 2% NaCL, after 48 hours, no change
PVDF coated aluminum coil
| Aluminum Alloy |
AA1100; AA3003; AA5005 |
| Coil thickness |
0.25mm,0.30mm,0.40mm,0.50mm |
| Coil width |
1240mm, 1270mm, 1520mm, 1550mm, 1575mm |
| Coating thickness |
Over 25 micro |
| Diameter |
405mm, 505mm |
| Coil weight |
2.5 to 3.0 tons per coil |
| Color |
White series, metallic series, Dark series, Gold series( accept color customs) |
Polyester coated aluminum coil
| Aluminum Alloy |
AA1100; AA3003; AA5005 |
| Coil thickness |
0.18mm,0.21mm,0.25mm,0.30mm,0.40mm,0.45mm,0.50mm |
| Coil width |
1240mm, 1270mm, 1520mm, |
| Coating thickness |
Over 16 micro |
| Diameter |
405mm, 505mm |
| Coil weight |
2.5 to 3.0 tons per coil |
| Color |
White series, metallic series, Dark series, Gold series( accept color customs) |
Brush finish aluminum coil
| Aluminum Alloy |
AA1100; AA3003 |
| Coil thickness |
0.15mm, 0.21mm, 0.30mm, 0.40mm, 0.50mm |
| Coil width |
1240mm, 1270mm, 1520mm, |
| Diameter |
405mm, 505mm |
| Coil weight |
2.5 to 3.0 tons per coil |
| Color |
Silver & gold |
Clean chromated aluminum coil
| Aluminum Alloy |
AA1100; AA3003 |
| Coil thickness |
0.15mm, 0.21mm, 0.25mm, 0.30mm, 0.40mm, 0.45mm, 0.50mm |
| Coil width |
1240mm, 1270mm, 1520mm, |
| Diameter |
405mm, 505mm |
| Coil weight |
2.5 to 3.0 tons per coil |
Our product is coated with high-performance fluorocarbon, polyester, polyurethane and epoxy coating, and is widely used for roofs, facade cladding, ceilings, aluminum curtains, composite panels, pipe wrap, advertisement plates, instrument panels, and other uses.
Packing:
Plastic film wrapped inside and carton packing. Wooden pallet with steel strip tied.
Buyers can slao choose to pay for wooden case packing, which enables safer and more room saving in loading.
Transportation of PVDF coated aluminum coil
Handle with care during transportation to prevent damage with the surface caused by collision,which affecting appearance.Covered with tarpaulin during transportation to avoid rain and snow.
When transporting at high temperature, you can put desiccants in the middle or make holes on both sides, and make the color aluminum plating roller have breathable, you can also place an exhaust system, that to avoid the oxidation of the aluminum roller caused by the high temperature water droplets during transportation
During transportation, we need to pay attention to the dry environment and good ventilation, and do not put it with corrosive products and other chemical substances, so as to cause unnecessary losses.
When larger materials are stacked together, they should be separated by materials such as wooden strips to prevent frictional damage during stacking or picking.
The production, transportation and storage of PVDF coated aluminum coil all need to our employees and users to try it out as required. Many people think that their products will have problems quickly after used, which is a quality issue. In fact, except quality problems, it may also be ignored in a daily protection, so we need reasonable storage and transportation.
Audited Supplier 
){kind=link}
){kind=link}