aluminium foil sheets 1100 H18 for aluminum composite panel

• Usage: Food Use, Kitchen Use
• Type: Foil
• Temper: Soft
• Treatment: mill finish
• Thickness: Thick Foil
• Surface State: Double light Aluminum Foil
• Model NO.: 1100 H18
• Rolling Characteristics: Rolling
• Material: aluminium
• Surface: Mill Finish
• Transport Package: Export Standard, Wooden Case and Wooden Pallet
• Specification: China Standard
• Trademark: HM
• Origin: China
• HS Code: 76069200
• Production Capacity: 4000mt/Month

Product Description

1100 h18 aluminum foil for aluminum composite panel

Alloy: 1100
Temper: H18
Thickness: 0.14-0.20mm
Width: 900_1400mm
Length: 900_1400mm
Packing: Export standard, wooden pallet or wooden case;
Origin: China
Payment Terms: T/T, irrevocable L/C at sight
Lead Time: Within 25 days
Application: Using for printed circuit board.
Remark: Specific requirement of alloy, temper or specification can be discussed at your request.

The aluminum composite panel is a composite of multiple layers of materials, the upper and lower layers are high-purity aluminum alloy panels, the middle is a non-toxic low-density polyethylene (PE) core board, and a protective film is pasted on the front side.

The common specification of aluminum composite panel is 1.22Mx2.44M, and the thickness is 3-5MM. Among them, aluminum foil or aluminum skin is one of the raw materials of aluminum composite panel. Its thickness is usually expressed by wire. Aluminum composite panel uses 1100 aluminum foil with a thickness of 8 There are two types of silk: indoor and outdoor according to the purpose. If it is an outdoor board, it can be customized, and the length can be 6M.

The common aluminum foil roll thicknesses for general aluminum composite panel are as follows:

Aluminum used for facade aluminum composite panel uses 0.20 mm, 0.30 and 0.40 mm, and 0.50 mm. Among them, 0.30 and 0.40 are more common, so the wind pressure resistance is better.

Aluminum foil coils for aluminum composite panel on the inner façade, the thickness of aluminum foil coils with structures of 0.15mm and 0.12-0.10mm is relatively wide.

Aluminum aluminium plate/sheet for PCB drilling entry
Alloy	Temper	Specification(mm)
		Thickness	Width	Length	Remarks
1100	H18	0.14-0.20	1244	1092  1041  940	Produce various specifications according to customers' requirements
			1220	1067  1016  914

TECHNICAL DATA SHEET

Alloy

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Other

Al

each

total

1100

Si +Fe:0.95

0.05-0.20

0.2

-

-

-

0.1

-

0.05

0.15

99.0

MECHANICAL PROPERTY

Alloy

Temper

Thickness(mm)

U.T.S(Mpa)

Elongation(%)

1100

H18

0.14-0.18

170-190

≥2

TOLERANCE

Thickness(mm)

Width(mm)

Length(mm)

Diagonal(mm)

±0.005mm

+1 -0

+1 -0

≤2